Clik 2-in-1 RIGHT ANGLED PUMP HEAD & REMOVABLE PUMP ADAPTER (Aluminum)

Right-angle pump head designed exclusively for Clik Valves

Upon connection, a distinctive "click" sound confirms a secure attachment.
Inflate tires quickly and easily with a smooth push-on/pull-off operation. The ergonomic 90-degree right-angle design ensures comfortable operation.

Detachable adapter for versatile use

• Equipped with a Schrader threaded adapter

• Compatible with conventional pump heads, CO2 cartridges, mini pumps, etc.

• All-in-one specification for a wide range of environments

Installation Method

• Removing the old pump head
  Unscrew the traditional pump head from the pump hose to remove it.

• Attaching the Clik-Connect Pump Head

  • Insert the cap of the Clik pump head into the pump hose.

  • If there is no gap, the connecting ring is not necessary. If there is a gap, choose the appropriate size from the two types of connecting rings provided and attach it to the hose.

  • Push the end of the Clik pump head onto the hose, then slide the connecting ring and hose nut towards the head and screw them on.

• Connect and inflate
  Push the Clik-Connect pump head onto the Clik Valve until you hear a "click," confirming a secure connection.
  Effortlessly inflate the tire, then simply pull off the pump head when finished.

When using only the adapter at the tip (can be used as a PREMIUM CLIC PUMP HEAD ADAPTER)

Can be attached to a pump head compatible with American valves.

• Unscrew the adapter from the right-angle part of the Clik body.

• When using with a conventional floor pump or mini pump, insert the adapter into the American valve port and close the lever.

• For American valve pumps, screw in the adapter to connect.

Contents

• Pump head body
• Connector ring compatible with hoses 8mm or less
• Connector ring compatible with 8-9mm hoses
• Hose nut