Customizing a chromoly frame
Adding a center stand mount or threaded bosses to your frame.
Make your existing frame exactly what you want it to be.
Pricing
All prices include tax| Center stand mount | ¥14,300- |
| Drum-shaped threaded boss | ¥4,400- |
| Chain hook | ¥3,300- |
| Recessed threaded boss | ¥6,600- |
| V-brake mount | ¥33,000- |
| Paint repair for weld marks | ¥22,000- |
・Center stand mount ¥14300-
・Drum-shaped threaded boss ¥4400-
・Chain hook ¥3300-
・Recessed threaded boss ¥6600-
・V-brake mount ¥33000-
・Paint repair for weld marks ¥22000-
-->
Q&A
＋ How do I place an order?
Please contact us via the inquiry page.
＋ What kind of bicycles can have a center stand mount attached?
Most chromoly frames can have one attached.
It may not be possible to attach to track bikes or road bikes with extremely short rear centers, or MTBs with unusually shaped stays.
Please contact us via the inquiry page for more details.
It may not be possible to attach to track bikes or road bikes with extremely short rear centers, or MTBs with unusually shaped stays.
Please contact us via the inquiry page for more details.
＋ Will there be any issues with the frame?
There will be almost no issues.
When attaching small parts, we use silver brazing, which melts at a lower temperature than regular brass brazing material.
Even if heat causes distortion, we will correct it by realigning.
When attaching small parts, we use silver brazing, which melts at a lower temperature than regular brass brazing material.
Even if heat causes distortion, we will correct it by realigning.
＋ What happens to the weld marks?
In most cases, they are removed like scratch repairs or the entire frame is repainted.
If you only request welding, we will deliver it after removing soot and flux.
If you only request welding, we will deliver it after removing soot and flux.
＋ What kind of bicycles can have V-brake mounts attached?
It was possible to attach them to a SURLY Steamroller.
It can be attached to frames with approximately 65mm of chainstay clearance at the rim surface.
It cannot be attached to road bikes or track bikes with thin seat stays made of lightweight tubing, as the frame will distort due to the braking power.
Please contact us via the inquiry page for more details.
It can be attached to frames with approximately 65mm of chainstay clearance at the rim surface.
It cannot be attached to road bikes or track bikes with thin seat stays made of lightweight tubing, as the frame will distort due to the braking power.
Please contact us via the inquiry page for more details.
＋ Can aluminum frames also be welded?
Currently, we do not perform aluminum welding.
＋ What is the turnaround time?
It's generally around 1 month.
This varies depending on the content of the order and the current order situation.
This varies depending on the content of the order and the current order situation.
←Back to Paint Service TOP
Inquiries